Error Code E17/F17

Bosch and Siemens Washing Machine Error Code E17/F17: Water Supply Problems

Is your Bosch or Siemens washing machine displaying error code E17 (Siemens) or F17 (Bosch)? This indicates a problem with the water supply. The machine is not receiving enough water within the set time. Don’t panic, here are a few things you can check yourself:

Possible Causes and Solutions:

• Water Tap: Check if the water tap is fully open. Sometimes it might be accidentally only half open.
• Inlet Hose: See if the inlet hose is kinked or blocked. Straighten the hose and remove any blockages.
• Filter in the Inlet Hose: There is a filter in the inlet hose where it connects to the tap. Unscrew the hose and clean this filter under the tap. Small particles can block the water flow.
• Water Pressure: Is the water pressure sufficient? You can test this by holding a bucket under the tap. A 10-liter bucket should fill within a minute. If the pressure is too low, contact your water supplier.
• Defective Solenoid Valve: The solenoid valve controls the water supply. If it’s defective, water cannot enter the machine. This component often requires professional assistance.
• Aquastop: Check if the Aquastop (if present) has not been activated. It can block the water supply in case of a leak.

Troubleshooting Steps:

1. Turn off the machine: Unplug the appliance from the power outlet.
2. Check the water tap: Ensure the tap is fully open.
3. Inspect the inlet hose: Check for kinks and blockages.
4. Clean the filter: Clean the filter in the inlet hose.
5. Test the water pressure: Perform the bucket test.

When to Call a Technician?

If the error code persists after following the steps above, or if you are unsure about the repair, please contact a professional technician. They can thoroughly inspect the machine and perform the necessary repairs.