Error Code Error 14

Error Code: Error 14

• Appliance Type: washing machine
• Brands: Bosch, Siemens
• Description: Description Error code Error 14 signifies a time-out condition related to water intake. Specifically, the internal water level sensor (pressure switch) has not registered that the required amount of water has entered the drum within the allotted maximum time frame of six (6) minutes from the start of the fill cycle. This indicates the machine cannot fill properly or quickly enough.

To troubleshoot this critical intake issue, please perform the following checks sequentially:

• Is the Water Tap Open? Locate the dedicated water supply valve (tap) connected to the rear of the appliance. Ensure this valve is turned completely to the fully open position. A partially opened tap restricts the flow rate, preventing the machine from reaching the necessary level within the six-minute limit.
• Check the Supply Hose for Kinks or Blockages: Carefully inspect the inlet hose(s) that connect the wall outlet to the back of the washing machine. If the hose is sharply bent, twisted, or kinked, the flow of water will be severely impeded. Additionally, if you have a dual-inlet machine (for hot and cold water), check both hoses individually. Blockages can sometimes occur within the small filter screens located where the hose screws onto the machine inlet; inspect and clean these filters if necessary.
• There Might Be an Issue with the Water Pressure in Your Home: If the taps are fully open and the hoses are clear, the problem likely stems from insufficient mains water pressure. The washing machine requires a minimum operating pressure to fill quickly. Test the household pressure by running a separate faucet nearby to see if the flow rate is weak. Low pressure may be caused by shared water use in the home or issues with the main plumbing system. If pressure is consistently low, professional plumbing assistance may be required. Description